Nowadays, Netgear Nighthawk is known for its mind-blowing services and that’s why millions of people use Netgear products. But, somehow some users have a Nighthawk router keeps disconnecting problems during their work. Therefore, to fix this problem we are going to tell you about the effective solution to this issue so that you can enjoy an uninterrupted internet. We recommend you read the whole article from up to down to understand the solutions. The influencing points are articulated in upcoming paragraphs.
First, we would like you to take a small look at the reasons behind the Nighthawk keeps disconnecting issue. By doing this, you can easily understand the post and able to fix the issue hassle-free.
Now, read the following reasons:
Weak internet signal
Inadequate power supply
The excessive distance between the devices
The Netgear router is overheating
Maybe some metal or wall is blocking the signal
The connection between devices is not good
These are the reasons why you are experiencing the Nighthawk router keeps disconnecting issue in your daily life. But, now you don’t need to worry because we have fruitful solutions for you that will assist you to tackle this problem. You just need to walk through them and implement them.
Key to Tackle Nighthawk Keeps Disconnecting
Here, we will give you several solutions to remove the Nighthawk router keeps disconnecting issue. All the solutions are very easy to perform and understand. You just need to follow the same steps as we mentioned here.
Check the Signal Perfection
Well, when your Netgear router drops the internet connection constantly then you need to check the signal quality, because most of the time due to a weak network, the router drops the connections. Moreover, if you connect your router and modem wirelessly then you must make sure that you place your router and modem within a 10 meters distance from each other.
In addition, you can also use the Ethernet cable to make a strong connection between the router and host modem because with the help of an Ethernet cable you can reduce the chances of disconnection.
However, you just need to keep one thing in your mind insert the Ethernet cable ends properly into the devices’ Ethernet ports. Otherwise, you might face the problem of dropping connections.
Power Off the Router
If you think why we recommend you power on router. The reason is sometimes the Netgear router loses the internet connection due to overheating of the router. So, to tackle this problem, you need to power off your router for at least half an hour because in between this time router gets cool and then give a constant and reliable speed to you.
Disable VPN and Proxy Application
Some users use the VPN and Proxy applications on devices and this also could be the reason behind the dropping connections. Moreover, the proxy application uses the third-party DNS server to hide the identities which creates the issue.
Therefore, you need to do one thing that you should disable the proxy on your Netgear account and then retry to join the wireless network.
Now, you can check the internet network to make sure you get the internet or not, if not then don’t worry we have another hack for you which we have discussed below. So, keep reading and continue!
Update the Firmware
The Netgear router disconnects frequently because of using an outdated firmware version. We recommend you update firmware of the Nighthawk router.
You can easily perform the firmware update. You just need to do Netgear Nighthawk login via the default web address or IP address. After that you need to perform the below-mentioned steps:
Once you sign in to the Netgear router admin panel
Click on the advance tab,
Go to the Maintenance tab,
You will see the list where you get firmware update option that you need to select.
Wait for some time
Thereafter, you will see the firmware update file which you need to download and install properly.
Thus, these are the solutions that you need to perform to get access to the internet via the router.