The LEDs on your Netgear Orbi router have different meaning. Whether you see Orbi purple light or Orbi pink light, the status of the lights indicates different status. To understand the meaning of Orbi lights, you must refer to this article.
Here, we have shed light on Orbi lights colors. Given this, continue reading!
Understanding Orbi Lights Colors
The description given below will guide you with the status of LEDs on your Netgear Orbi router.
Netgear Orbi Power LED
Solid Green
If the power LED on your Netgear Orbi router is solid green, it means the device is powered on and ready to use. To see if your Orbi device is working perfectly, do Orbi login using orbilogin.net.
Solid Amber
Solid amber on your Orbi device indicates that it is booting up. So, wait patiently will the Orbi device boots up properly.
Pulsing Amber
Your Orbi is reset back to factory default values. So, to make the most out of your Orbi, you have to set it up from scratch. Refer to the term and know how to do Netgear Orbi setup.
- Apart from this, pulsing amber on your Orbi indicates that its firmware update process is in progress. Wait until the firmware update process gets completed.
Orbi Purple Light
The purple light on your Netgear Orbi router indicates that it has no internet connection. To rectify the issue, you must ensure to connect your Netgear Orbi router and modem in a proper way using an Ethernet cable. Apart from this, you must call your internet service provider ensuring internet-related things are okay from his end and you are receiving fast WiFi services from his end.
Power Cycle Your Internet Modem
If contacting the internet service provider doesn’t fix the internet-related issue for you, then try power cycling or restarting your modem. How? By disconnecting modem and Orbi and then, disconnecting it (modem) from its respective wall socket. Wait for 5 minutes, plug in the modem back, and reconnect it with Netgear Orbi router.
We hope that this will help you fix Orbi purple light issue.
Orbi Pink Light
The Orbi pink light indicates that there is no sync between your Orbi and satellite. To overcome with the issue, you need to place them closer.
Here “them” we are referring to your Orbi and satellite.
After placing them closer, press the sync button on your Netgear Orbi router anf wait for 5 seconds. Now, you need to press the sync button on the satellite as well.
Congrats! Your Orbi satellite are synced and you have got a relevant fix for Orbi pink light issue.
Orbi Satellite not Connecting?
If you encountered with Orbi satellite not working issue, then to fix it, you need to restart them.
Here’s how to restart your Orbi satellite:
- Unplug your Orbi and the satellite.
- After unplugging them, you have to wait for 5-10 minutes. The power LED on your Orbi satellite will start blinking green. You have to wait for the LED (s) on your devices to get stable.
- Then, you can plug them back in again.
- Resync them using the instructions outlined above in the correct order.
Are your Orbi satellite connected? To verify the same, access orbilogin page from a computer or laptop. But, make sure that the device is connected to the WiFi network of your Netgear Orbi router.
The Final Thoughts
Our article on Orbi lights meaning ends here. Here’s to hope that the fixes to troubleshoot Orbi pink light, Orbi purple light, or Orbi red light issue we have given above were helpful. In the event, you are still baffling with Orbi’s pink, purple, or red light, we suggest you update the firmware of your Orbi router right away.