Become a member

Get the best offers and updates relating to Liberty Case News.

― Advertisement ―

spot_img

Is Your Netgear Extender Not Broadcasting SSID? Let’s Fix It!

If your Netgear extender isn’t broadcasting its SSID, it can prevent you from accessing the internet. The invisibility of SSID means that your devices...
HomeNewsTechHow to Fix Resolve Netgear Orbi Satellite Pink Light Issue

How to Fix Resolve Netgear Orbi Satellite Pink Light Issue

Are you a Netgear Orbi user who is stuck with Orbi pink light on satellite? You have come to the right place. Here you will get several techniques that you can implement and turn the pink light into blue.

 We recommend you don’t miss the points from the post. Otherwise, you might not be able to fix the issue. However, do you know the meaning of Orbi light colors? An Orbi router blinking white means it is booting up and Orbi pink light means the satellite failed to sync with Orbi router. The next section will help you resolve the issue.

Fixed: Netgear Orbi Satellite Pink Light

Here, in this section, you will get suitable hacks that can assist you in tackling the pink light issue on the satellite. All the solutions are explained in detail; you just need to read out and implement them as mentioned.

Check the Internet Connection

The foremost thing you need to do is check the internet speed. Make sure that the internet is working at a good speed. If you notice your internet is working at a glacial rate then we recommend you contact your internet service provider.

Update Firmware

Do you remember when you updated your device firmware last time? If not that means you updated your device a few months ago and your Orbi still has the outdated firmware. We recommend you check the firmware version of your Orbi system. If you found that your device is running into an outdated version then update it as soon as you can.

You can use the Orbi app to update the device. You can also use Orbi login page on a web browser for this. Refer to the user manual to learn how to update Orbi firmware version.

Cross-check the Cable Connections

There is a chance that you have uses a broken and damaged Ethernet cable to connect the Orbi router and modem. This will result in internet issue. To deal with this problem, you need to cross-check the cables properly. If you find any damage to the Ethernet cable then use another one to link the devices.

Apart from it, you also need to verify if there’s a loose connection. It is seen that many times the Ethernet end is not properly inserted into the device’s Ethernet ports. So, check all the connections carefully. If you find any loose connection then fix it right away.

Remove WiFi Interference

WiFi interference also causes this issue. You need to ensure that your device is not surrounded by home appliances and metal objects. These objects can cause WiFi interference. Therefore, if you have installed your device near the home appliances then we suggest you change the location of your Orbi system to resolve the issue.

However, if you are still stuck in the same situation then don’t panic. We have another hack for you that you can perform and will see the pink light go off.

Reset Your Orbi

This is the last solution that you need to perform if you still face the pink light on your device. This is Orbi factory reset. All the steps are mentioned below:

  • Press the Reset button located at the backside of the satellite.
  • Wait for 10 seconds.
  • Release the button.

Now, you should try connecting it with the router and check whether the pink light has gone off or not.

Wrap Up

Hence, these are the hacks that you need to perform to turn the pink light into the blue light. Once the pink light goes off. You will be able to use the uninterrupted service of the Orbi system again.