Cameras are one of the best and important parts of your home security which connects with the WiFi router. Arlo security camera is one of the best in business. it is simple to connect with WiFi and you can operate with the help of the Arlo.com login and Arlo app in your phone.
Arlo Camera Setup
You have to connect the Base station to the router with the help of the Ethernet cable. Just connect it to the router’s LAN port and other end will connect to the Arlo SmartHub Ethernet port.
Then simply place the camera at your desired position in your house. Now, you have to start the login process.
Arlo Camera Login
Via Arlo App
- You have to go to the Play Store if you have Android device or App Store if have iOS device.
- Here, just search the Arlo Security app and download it by taping on the Install (Play Store) or Get (App Store).
- After that, you have to open it and complete the Arlo App login system in your house.
- To configure, you just have to Sign Up, enter the Email Address, name, password and confirm password.
Via MyArlo.com
- Connect the computer or laptop to the device network using SSID details or LAN cable.
- Go to a web browser, enter the login URL and search.
- You will get to the Arlo login interface window, here; you have to enter the username and password.
- Configure all the settings correctly and complete the setup. Now, you can easily connect your internet devices to the router.
Troubleshooting Tips Checkout Hardware
Base station unit connects with the home modem or ISP server socket with the help of Ethernet cable. So the cable must be in good condition. If the modem can’t send the internet signal to the router unit, then you should change the cable straight.
Change Location
Optimal location for the networking devices are far from the electronic devices like microphones or microwave ovens. You must make sure that the modem and Virgin router is powered on at the optimal location.
If you find any electronic device nearby, then change the location of the networking devices.
Update Firmware
- Open interface login page of Arlo camera in your computer and access by admin credentials.
- You have to go to the Settings option and select the Firmware tab.
- Here, you just have to search for the router firmware newest version to update.
- Then, just tap on the UPDATE button to start the Firmware update process.
Reboot Arlo System
The rebooting process shut down all the system and turn it on again, this will refresh the networking device settings and networks. Let’s have a look how to reboot using two different methods;
- You have to find power button and press it twice to shut it down and turn it up (rebooting).
- The other method to restart the device is disconnect the power cord and connect it again in to the electric wall socket.
Reset Arlo Device
The last option to solve the Arlo or SmartHub/base station not connecting to network is reset the device by following some simple instructions;
The method to reset the device is long pressing the RESET button using a sharp object.
But, after the reset process, you have to begin and complete Arlo Security login process again.
The End Section
Here, you have seen and learned about how to connect the Arlo base station to the router and connect camera to the base station. We have also provided simple troubleshooting tips and solutions to dispel any problem.