Is your host router stopped performing well? Are you not able to make the most out of your Linksys WiFi extender and access extender.linksys.com because of your router? Are you planning to buy a new router? Have you already bought a new router? Great! Then, you might be wondering how to connect it to your Linksys extender, right?
Wonder no more because we can help you doing that! In this article, we have given step-by-step instructions following which setting up Linksys WiFi extender using a new router will be a piece of cake for you. Thus, stick to this 7-minute read, will you?
Connect Linksys Extender to New Router
Step 1: Turn on Your Linksys Extender
To initiate the Linksys WiFi extender setup process, you need to first plug it into a working wall socket and turn it on by press the power button. Apart from this, ensure that your Linksys device is:
- Properly plugged in
- Not receiving an inadequate power supply
- The wall socket is not damaged
Step 2: Connect Your Extender to Router
This is one of the important steps and answer to your question – how to connect Linksys WiFi extender to new router. You can connect your devices either using an Ethernet or wireless source.
If your router and Linksys extender is WPS-capable, then press the WPS button on your Linksys extender and within 2 minutes – press the WPS button on your new router.
And, in case the devices aren’t WPS-capable, then use an Ethernet cable for connecting them and then – log in to your new router using 192.168.254.254 – and configure its settings as per your Linksys extender.
You Are All Done!
Unplug your Linksys WiFi extender and plug it anywhere in your home. But, the area you choose for your Linksys device must be within range of your new router. And, once you are done with the placement process, connect your devices to the new extended WiFi network and enjoy blazing-fast internet speed from any corner of your house.
In this way, you can connect your Linksys WiFi extender to your new router.
Linksys WiFi Extender and Router Not Working?
If you find that your devices are not working even after connecting them properly, then to make them working – you can try restarting them.
The instructions that will help you restart your Linksys WiFi extender and new router are as follows:
- Unplug your Linksys extender and router.
- Then, you need to disconnect them and wait for 2-3 minutes.
- Plug in back your devices again. We suggest you – plug in your router first – and then plug in your WiFi range extender.
Try connecting them both either using a wired or wireless source.
Update Firmware
Chance are – the firmware of your Linksys WiFi extender and new router is outdated – which is why – they have stopped working suddenly. Need not to worry! To make the most out of your devices, you just have to update the latest firmware version on them.
Check Your WiFi
It looks like your WiFi is not up-to-the mark and that is preventing your smart devices to work properly. Hence, we suggest you call your internet service provider. Maybe – he has put down your WiFi services down for maintenance. If so, ask him to resume the services as soon as possible. And, after receiving good WiFi services and range from your ISP end, see if your devices have started working.
Note: You have to contact the service provided of your router. Remember that – if its services are not good or stable, you will have issues connecting it to your Linksys extender.
We hope that – this hack will prove helpful!
The last Words
Our article on how to connect Linksys WiFi extender to new router ends here. Anticipating that the instructions we have listed above will help you connect your devices in a hassle-free manner.