Home Blog

How to Fix Resolve Netgear Orbi Satellite Pink Light Issue

0

Are you a Netgear Orbi user who is stuck with Orbi pink light on satellite? You have come to the right place. Here you will get several techniques that you can implement and turn the pink light into blue.

 We recommend you don’t miss the points from the post. Otherwise, you might not be able to fix the issue. However, do you know the meaning of Orbi light colors? An Orbi router blinking white means it is booting up and Orbi pink light means the satellite failed to sync with Orbi router. The next section will help you resolve the issue.

Fixed: Netgear Orbi Satellite Pink Light

Here, in this section, you will get suitable hacks that can assist you in tackling the pink light issue on the satellite. All the solutions are explained in detail; you just need to read out and implement them as mentioned.

Check the Internet Connection

The foremost thing you need to do is check the internet speed. Make sure that the internet is working at a good speed. If you notice your internet is working at a glacial rate then we recommend you contact your internet service provider.

Update Firmware

Do you remember when you updated your device firmware last time? If not that means you updated your device a few months ago and your Orbi still has the outdated firmware. We recommend you check the firmware version of your Orbi system. If you found that your device is running into an outdated version then update it as soon as you can.

You can use the Orbi app to update the device. You can also use Orbi login page on a web browser for this. Refer to the user manual to learn how to update Orbi firmware version.

Cross-check the Cable Connections

There is a chance that you have uses a broken and damaged Ethernet cable to connect the Orbi router and modem. This will result in internet issue. To deal with this problem, you need to cross-check the cables properly. If you find any damage to the Ethernet cable then use another one to link the devices.

Apart from it, you also need to verify if there’s a loose connection. It is seen that many times the Ethernet end is not properly inserted into the device’s Ethernet ports. So, check all the connections carefully. If you find any loose connection then fix it right away.

Remove WiFi Interference

WiFi interference also causes this issue. You need to ensure that your device is not surrounded by home appliances and metal objects. These objects can cause WiFi interference. Therefore, if you have installed your device near the home appliances then we suggest you change the location of your Orbi system to resolve the issue.

However, if you are still stuck in the same situation then don’t panic. We have another hack for you that you can perform and will see the pink light go off.

Reset Your Orbi

This is the last solution that you need to perform if you still face the pink light on your device. This is Orbi factory reset. All the steps are mentioned below:

  • Press the Reset button located at the backside of the satellite.
  • Wait for 10 seconds.
  • Release the button.

Now, you should try connecting it with the router and check whether the pink light has gone off or not.

Wrap Up

Hence, these are the hacks that you need to perform to turn the pink light into the blue light. Once the pink light goes off. You will be able to use the uninterrupted service of the Orbi system again.

Easy Steps to do Netgear WiFi Extender Login

0

You might hardly find people who have not heard about Netgear. It has been an undefeated candidate offering high-tech WiFi range extenders. Therefore, you can simply install the Netgear WiFi range extender to create a seamless home WiFi network. But, before you complete the installation, you will have to do a Netgear extender login.

Sound intimidating? If so, we have come to your rescue. First, we are going to help you prepare for the login process. Once everything is set perfectly, you can start the NetgearWiFi extender login process. So, without creating a fuss, let’s roll further. Read on.

Preparation Guide for Netgear WiFi Extender Login

Before you access the Netgear WiFi extender login page, you need to do a little preparation. Don’t worry! We will show you the path.

To access the repeater login page, you need the internet. Thus, you need to link your NetgearWiFi range extender to the host router. We would advise that you connect them using the Ethernet cable. However, if you don’t want the cables, a wireless connection can also help you.

But, before using the wireless connection, you must ensure that both the devices are in range. Otherwise, you might not get the required signals to connect your repeater to the internet.

Netgear WiFi Extender Login: Process

We hope you have followed the above-given steps to prepare for the Netgear WiFi extender login process. Let us now get through the correct process.

  • Turn on Repeater

You need to power on your Netgear WiFi range extender. To do so, you need to plug it into a wall socket. While choosing an electric socket, you need to check that it does not have signs of short-circuiting. Moreover, the device should fit into the chosen wall socket.

Has the device turned on? No? Well, make sure you have pressed the power button on your device. After that, wait for a few seconds until your range extender powers on.

  • Start PC/Laptop

The next step is to turn on your PC or laptop. The power supply cable should be in the best working condition. Otherwise, your computer might lose power during the Netgear WiFi extender login process. Laptop users need to have a charger at their disposal.

The chosen system must have an updated operating system. Otherwise, you might encounter errors.

  • Open Internet Browser

Before you load the browser, ensure to connect your PC to the Netgear_ext network. Choose a web browser on your computer/laptop. The catch here is to go with an updated internet browser. Why? Well, an outdated web browser might lack compatibility with new and updated websites.

So, to minimize the errors, you need to have access to an updated web browser. As per your convenience, get access to the compatible web browser.

  • Enter Default URL

Take your mouse to the address bar of the chosen web browser and click on it. That is where you will be entering the default URL of the Netgear WiFi extender. While typing in the address, you need to ensure that there are no mistakes.

Hit the Enter key after you are done entering the web address. You should avoid using the search bar to enter the URL.

  • Type Login Details

You get redirected to the Netgear WiFi extender login page. That is where you need to enter your default login credentials. To know them, get through the extender user manual. Moreover, don’t commit even a single error while entering login credentials.

Click on the Log In button after you are done. You will get redirected to Netgear WiFi extender setup wizard which means you have successfully completed the login process.

Wrap Up

We hope you have done the repeater login. Thus, you can easily change Netgear WiFi extender settings later on. Make sure you leave feedback in the comment section below.

Orbi Satellite Not Connecting to Router [Solved]

0

Orbi mesh system contains three networking devices, in which one works as the router (connects with modem). Other two nodes are satellites that works as extender (connects with router wirelessly).

It is an extra ordinary mesh system that simply fits in your house and connects with your modem network. Here, we will discuss a major problem that occurs sometime. The problem is Orbi satellite not connecting to the router.

Here, we will provide possible reasons why this mentioned problem occurring and how to dispel it with the help of solutions and tips. So, let’s start it with the causing factors.

Satellite Not Connecting to Router (Reasons)

Connecting satellite to the Orbi router is an easy process, which you can easily done by just hitting the sync button. Here we will share a list of reasons why your router not connecting with satellite.

  1. Internet blockage can be a reason why you are facing the connection error.
  2. If the router is not connected to the modem via Ethernet cable, then it is also cause troubles.
  3. Satellites and router must be in reach of each other, so if they are not then it is also a reason of the problem.
  4. Not configured Orbi mesh system from the interface can be a causing factor of the connection issue.

So these were the possible reasons why your router is not connecting to the satellites. Now, have a look how to dispel the problem establish the satellite to router connection with the help of some simple solutions and tips.

Satellite Not Connecting to Router (Solutions)

There will be five troubleshooting tips which you can use to solve the router to satellite connection technical problem. Let’s start the sections without wasting any time.

1.Unblock Interruptions

Networking interruptions can cause connection problems. So, to dispel the blockage, you have to the check there is not electronic device near to the router or satellite. Change the network devices location, if you find any electronic device near them to optimal spot in your house.

2.Confirm Router to Modem Link

Cable modem is a wired device, which sends WiFi signals to the WiFi router. It helps router to provide internet services to your phone and other devices in your house.

Making sure that router WAN port is connected to the modem’s LAN port can dispel the connection issue between the router and satellite.

3.Keep Satellite in Router Range

You must place the Orbi satellite in the range of the router, because if you choose a location that is far away, then you will obvious face troubles. So keep satellite close to the WiFi router in your house.

4.Configure Orbi Before Using Services

You can manage settings from the interface of Orbi router, but you must connect the router to satellite first. To configure the Orbi device, you have to connect the computer to the Orbi network. search the login URL orbilogin.com, enter the credentials and reach to the interface, then adjust the settings.

5.Reboot Orbi Mesh System

At last, you can dispel the connection problem by rebooting the Orbi mesh system. Just find and press the power On/Off button twice to restart the mesh router.

Final Section

Here you have read the possible causing factors that explain why your satellites are not connecting to the Orbi router. Then, at the end we have provided simple to apply troubleshooting tips and solutions to fix the router to satellite connection.

Starlink Router has no WPS? How to Connect it to Extender?

0

If your Starlink extender doesn’t have the WPS button on it, then you might be wondering about how to connect it to your WiFi extender, right? In this article, you will get to know how to connect WiFi extender to Starlink router without WPS. Given that, continue reading!

How to Connect WiFi Extender to Starlink Router without WPS?

The steps that will help you connect the devices without using the WPS method are outlined underneath:

Power on Your WiFi Extender and Starlink Router

First things first, you need to power on your WiFi extender and Starlink router. Make sure that are plugged in closer to each other and receiving proper power from their respective wall outlets. Also, make sure that the wall sockets of your devices are well-working.

Don’t sweat over it if you don’t have two working wall sockets at the same place for plugging in your WiFi extender to Starlink router closer. Just install a one or you can choose a spot in your home where you have the wall sockets (2) installed in reach of each other.

Connect Your WiFi Extender and Starlink Router

Ensuring a steady power supply to your WiFi range extender and Starlink router, the next step in line to make the connection between them is right here. Put your hands on a working Ethernet cable and then – insert its one end in your WiFi extender and other end in your Starlink router.

Prior to proceeding further, you have to check the connection between them as well and ensure that it is firmly made.33

Access the Settings

Now, you have to open a computer or laptop and connect it to Netgear_ext. Once you are done, open a web browser of your choice and enter mywifiext.net in the address bar – and press the Enter key. Thereafter, you have to input the admin credentials of your WiFi range extender in the given fields, and click Log in.

You are all Done!

  • Access the settings of your WiFi range exender. And, once you are in, input the SSID of your Starlink router, enter the password, and apply the changes.
  • Make sure you enter the router’s SSID and password correctly.

In his simple way, you can connect WiFi extender to Starlink router without WPS.

WiFi Extender and Startlink Router not Working?

What happened? You have connected the devices in a proper manner but they are not working? If yes, then you can try restarting them. Sometimes, due to technical glitches, WiFi devices mat not work as per expectations.

Don’t worry! Restarting is the best remedy to do away with the problem. So, without thinking much, follow the steps outlined below and know how to restart your WiFi extender and Starlink router.

  • Power off your WiFi extender and Starlink router both.
  • Once you are done, disconnect them and wait for 2 minutes.
  • Plug them back in again.
  • Reconnect them.

Now, try to access mywifiext.net from a computer or laptop to see if your devices are now working or not.

Update Firmware

Outdated firmware version on your WiFi extender and Starlink router and prevent them from working in a hassle-free manner. So, what you can do in order to make the most out of them is to check if the latest firmware version is available for update. Just in case, you find the firmware to be updated on your WiFi extender and router, update it right away.

To Conclude

We really hope that the instructions we have provided above will help you connect WiFi extender to Starlink router. If your devices are successfully connected, then you are all set to enjoy the extended yet improved internet speed from any corner of your house.

Linksys Velop Stuck on Blue Light? Let’s Fix!

0

What happened? Linksys Velop stuck on blue light? Yes? Don’t worry! Blue color light indicates everything is good. But, if the LED stuck on blue light for a longer time than expected, it means you are trying to reset your Linksys Velop. If so, then it is important that you follow the correct instructions to execute the resetting process.

How to Reset Linksys Velop?

The instructions that will help you reset Linksys Velop are outlined underneath:

  • Ensure to plug in your Linksys Velop to a working wall socket.
  • If your Velop is connected to other devices in your home, kindly disconnect them for some time.
  • Locate the reset hole on your Linksys Velop and press it using a paper clip or toothpick.
  • Hold the Velop’s reset hole for 8-10 seconds and release it.

Now that your Linksys Velop is reset in a successful manner, the power LED on it will start blinking blue and become stable in a short while.

How to Set Up Linksys Velop?

To make the most of your Linksys Velop, it is important that you reconfigure it after resetting.

Don’t know the process of Linksys Velop setup? If yes, need not to worry! We have got you covered! In the upcoming section, you will get instructions to set up your Linksys Velop in a hassle-free manner.

  • Download and launch the app in order to access the dashboard of your Linksys Velop.

While downloading the app, make sure that your mobile device is connected to your Linksys Velop.

  • Once you have accessed the dashboard of yoyr Linksys Velop, tap menu icon and then you need to tap on Set up a new product.
  • Tap on Add Another node to xxxxxxxx.

Note this down – xxxxxxxx is the default WiFi of your existing WiFi network.

  • Now, you need to tap on To extend my Wi-Fi with a new child node and thereafter, you will be prompted to Turn on Bluetooth (recommended).
  • Once the Bluetooth of your device is turn on, read the instructions very carefully and know how to place the node correctly. Once you are done, tap next.
  • Plug in your Linksys Velop and tap Next. Once you are done, the power LED on the Velop will turn solid blue.

Netgear WiFi Extender Dropping Connection?

0

Is your Netgear WiFi extender continuously dropping connection? Have you tried all the possible fixes but the issue remains the same? Well, if the issue is not leaving your tail and you are desperate to get rid of it, then luckily your search finally ends here. In this article, we have provided some of the best solutions that will surely help you get rid of the Netgear WiFi extender dropping connectionissue on the fly. But, hold on! Before you implement the hacks outlined below, ensure that you have done Netgear extender setup via mywifiext.net in a proper way.

FYI, experiencing slow or poor internet connection is one of the major causes that result in the issue. So, if you are not sure whether you have configured the Netgear WiFi extender in a proper way or not – reset it back to factory default values first – and then configure it from scratch.

What happened? Despite configuring the Netgear extender in a proper way, the issue is still causing pain in your neck? Don’t know what exactly is the reason behind getting the dropping connection issue? No worries! If you really want to know the reasons causing the issue, then scroll down a little.

Netgear WiFi Extender Dropping Connection

The Reasons

  • Technical glitches or overheating of the Netgear WiFi extender
  • Internet-related issues from your ISP end
  • Sudden power outage or fluctuation in the electricity
  • Outdated Netgear WiFi extender’s firmware
  • WiFi network interference
  • Connectivity issues between your host router and Netgear WiFi extender
  • And, the bad location of your Netgear device

So, we have listed the topmost reasons that can impact the WiFi signal quality of your Netgear range extender. Now, take the help of the below-mentioned troubleshooting hacks to eliminate the issue from the comfort of your home.

Netgear WiFi Extender Dropping Connection [Fixed]

Fix 1: Reboot Your Netgear Extender

Let us begin with troubleshooting the issue by rebooting the Netgear device. Why: Because of overheating or some technical glitches, your Netgear extender may drop connection! Need not to worry! Simply reboot the device by applying the instructions highlighted below:

  • Power off your WiFi extender.
  • Unplug it from the power socket.
  • Turn the extender on after 2-3 minutes. Plug it back. Make sure you choose a working power socket for it.

Fix 2: Ensure a Stable Connection

You may experience the dropping internet connection for your Netgear WiFi extender if you have an unstable connection. No worries! Here’s what you can do!

  • First of all, you need to contact your internet service provider and ensure that there is no issue from his side.
  • Secondly, make sure to connect your WiFi extender and your host router using an Ethernet cable or wireless source. Remember that – the closer you place your devices, the zero WiFi signal drop issue you will get.

Fix 3: Check the Power Supply

Are you still getting the Netgear WiFi extender dropping connection issue? If so, then you need to check the wall outlet that is supplying the power to your range extender. If you find any damages in the socket, get it repaired immediately by calling up an electrician.

Fix 4: Update Netgear Extender Firmware

So, you are reading this fix – it means that the issue hasn’t been resolved yet, right? Yes? Fret not! Straight away open your desktop or laptop and power it up. Once you are done, log in to the extender using mywifiext.net and download the latest version of firmware by simply applying the on-screen instructions.

With this, we are going to put a full stop to this article on how to fix Netgear WiFi extender dropping connection issue. We hope that the hacks mentioned here were helpful.

I Forgot Linksys Router Password! Help!

0

The Linksys router password and linksyssmartwifi.com is used to access the login page of your Linksys device. And, the default password (unless changed) is “admin” or “password” (without quotes). However, we recommend that you change the default password of your Linksys router in order to keep it away from intruders.

But, what if you forgot Linksys router password or linksyssmartwifi.com refused to connect? Need not to worry! You can hard reset the router and restore its settings to the factory default ones. However, if you choose to reset the device, you will need to go through the reconfiguration process again.

Thus, to reset your Linksys router, apply the guidelines highlighted below:

How to Reset Linksys Router?

  • Locate the Linksys router’s reset hole.
  • Have you found it? If yes, then press it gently.
  • Now, release the router’s reset hole.

Once you are done resetting your Linksys router, its password will also be reset to default. Now, using the default using do Linksys wireless router setup again from scratch.

After reconfiguring your Linksys router in a proper way, we suggest you change its default password to a new one. Doing so will keep your router’s WiFi secure.

How to Change Linksys Router Password?

  • Power up your Linksys router and ensure that it is receiving a steady power supply from a working power outlet.
  • Once you are done supplying sufficient power to the router, put your hands on a desktop or laptop. Update the software of the device as well prior to putting your hands on it.
  • Open an internet browser on the device. Make sure to use a browser that is up-to-date.
  • Once you are successfully done applying all the above-mentioned three steps, hover your mouse cursor over the browser’s address bar and enter linksyssmartwifi.com or 192.168.1.1. Keep in mind, the router’s default IP and the web address will not work if you use the search bar for entering them.
  • After entering 192.168.1.1 or linksyssmartwifi.com in the address bar, you have to press the Enter key. Soon, you will see yourself landing on the Linksys router login window.

You are Almost Done!

  • You have to log in to your Linksys router with your current (default) router’s username and password.
  • Click on Login to have access to the router’s Settings. Once you have accessed it (the settings) take the mouse cursor on the Wireless option and select Wireless Security.
  • First, enter your current password and then the new one in the Passphrase field. Ensure to choose a longer and stronger password for your Linksys router.
  • Click on Apply to save the changes.
  • A new pop-up box will appear. Click on Yes and then on Ok.

What happened? You are unable to change the password of your Linksys router because you are unable to log in to it? No worries! Just follow a couple of fixes highlighted below and know how to log in to Linksys router in a flash.

Unable to Log in to Linksys Router?

Power Cycle Your Linksys Router

Yes, you read it right! Sometimes, minor technical glitches in the router can also prevent you from logging in to it. In such a case, power cycling is suggested.

How to power cycle Linksys router? Just unplug it from the wall socket, wait for a few minutes, and plug it back in again.

Once you are done doing that, refresh your network list and ensure to have access to the router’s SSID.

Check Your Internet Connection

An unstable or slow internet connection might not allow you to log in to your Linksys router. So, contact your ISP for the same and ensure that everything is fine from his end.

Bonus!

Once you are in to the login page of your Linksys router, we suggest you enable parental control. Because – doing so will restrict the access of media and content to their children.

On the off chance, you face parental control not working, then here are the hacks that you can apply.

 

  • Check your internet connectivity and be certain that it is working fine.
  • Update firmware. Remember that – because of ouddated firmware – the parental contol feature may give issues working.
  • Configure parental control settings in a proper way.
  • Restart your Linksys device along with connected devices.
  • Update your operating system.

In accordance to the hacks listed above, we hope that parental control is working for you now.

A Guide to do Wireless-N WiFi Repeater Login

0

To your knowledge, the Wireless-N WiFi repeater login page will assist you to get access to the settings wizard. By logging in to your WiFi repeater, you can configure it, modify its settings, update its firmware, etc. in a hassle-free way. However, getting the access to the repeater’s login page will require you to meet certain requirements of the device in discussion beforehand.

Getting Started!

If you are looking for detailed information about how to access Wireless-N WiFi repeater login page then you have come to the right place. In this post, you will walk through the quick guide for the repeater’s login page. Moreover, you are going to learn about different types of things that you need while accessing the login page. Keep reading!

First, we would like you to prepare some important requirements that you will need while doing repeater login. By getting ready all the requirements you will remove the chances of issues.

Requirements for Wireless-N WiFi Repeater Login

All the requirements for executing the repeater login process are outlined below. You just need to walk through them and prepare all them all.

  • Working power source
  • Good internet
  • Updated internet browser
  • A computer or laptop
  • An Ethernet cable

Thus, these are the requirements that you need to get prepared before performing Wireless-N WiFi repeater login. Now, let’s dig into the process.

Wireless-N WiFi Repeater Login [Complete Instructions]

In this section, you learn all the steps in detail. All the steps are mentioned correctly. You just need to read and implement them.

Power on the Wireless Repeater

The foremost thing you need to do is give fluctuation-free electricity from the power socket. You need to make sure that you use a good conditioned wall outlet. It is seen that users use the damaged socket and face issues. Apart from it, ensure that the power cable of the repeater is non-damaged.

Connect the Repeater to Router

Now, you need to connect your WiFi repeater and router through an Ethernet cable. To do so, connect one end of the cable in your router and other end in your wireless repeater.

Open Web Browser

Once you connect the device you need to switch on the computer or laptop for the further process. Once you open the computer, launch the web browser on the device. Ensure your internet browser should be running on the latest version.

Make sure that your client device is connected to your WiFi repeater wirelessly or using a wired source. And, what’s more? You must have access to active internet connection.

This tip is the key to repeater login success!

Access the Default Web Address

Now, you need to enter 192.168.10.1 IP in the address bar and press the Enter key. Be very careful while entering the default IP of your WiFi repeater.

Enter Default Credentials

Have a look at the user manual. Over there, you can find the default login credentials of your repeater. Have them and then enter then correctly in the required fields, and head over to the next step.

Log In to the WiFi Repeater

Once you put the username and password into the fields. You need to click on the Login button. You will see the Wireless-N WiFi repeater setup page which means you access the extender login page successfully.

Hence, these are the steps that you need to perform to access the Wireless-N WiFi repeater login page. Now, you can change the settings of the repeater accordingly.

To Conclude

Our Guide on how to do Wireless-N WiFi repeater login ends here. We anticipate that the steps we have provided here will help you log in to your WiFi repeater with ease. If yes, then with the hope of helping you, we are wrapping up our piece of writing.

DLink WiFi Extender Not Working?

0

Is your DLink WiFi extender not working? Yes? No worries! There can be numerous reasons causing the issue – like improper DLink extender setup, no connection between extender and router, poor WiFi, bad placement of the extender, outdated firmware, etc.

No matter what would be the reason behind the issue, know that we have got you covered. In this article, you will find tested and proven hacks that will help you resolve DLink WiFi extender not working issue from the comfort of your home. Keep reading!

[Fixed] DLink Extender Not Working

Here are the fixes that will help you troubleshoot the issue in discussion.

Restart Your DLink Extender

You must restart your DLink extender in order to make it up and running. The reason why we are suggesting you to restart the device is technical glitches. And, that’s true! Technical glitches are the most common reason behind affecting the performance of your range extender. Thus, to get the issue fixed and to make the most out of your DLink device, we suggest you restart it using the instructions below.

  • Unplug your DLink WiFi extender.

  • Disconnect your extender from other devices in your home.

  • Wait for 5-10 minutes – and plug in back the extender.

  • The power LED on the extender will start blinking green. Once the extender’s LED gets stable, reconnect it with your disconnected devices – and see if it has started working for you.

Change DLink Extender Location

On the off chance, you extender is still not working, then you can try changing its location. Maybe – your DLink device is placed in an area in your home where its WiFi signals are getting hampered by your neighboring networks. So, what you can do – move the extender to an optimal location – where it can work without any hassle.

Note this down – the perfect location for your range extender is at the center-most and higher area of your home – near to your host router.

Update DLink Extender Firmware

Outdated firmware on your DLink extender can also affect its performance. So, if you want to stop this from happening again in future, we suggest you update DLink extender firmware right away. For this – you just need to log in to your extender using dlinkap.local – access the firmware update page, and follow the on-screen instructions in order to update your device.

Remember that – your DLink device will reboot automatically once the process of firmware update gets completed.

Connect DLink Extender to Router

Have you connected your DLink extender and router? Yes? Then also your range extender is giving you issues while working properly? If so, need not to worry. It seems like you haven’t made a proper connection between them.

So, keep the below-mentioned points in to consideration while establishing a solid connection between the two:

Ethernet Connection

  • The Ethernet cable you have used for connecting your DLink extender and router should be in working condition.

  • Apart from this, ensure that – you have inserted the cable tightly in the Ethernet/ internet ports of DLink extender and router.

Wireless Connection

But, if you have connected your DLink extender and router using a wireless source – then make sure – they are placed at a safe distance and you have used proper instructions to connect them.

The proper instructions to make a wireless connection between your DLink extender and host router are as follows:

  • Locate and press the WPS button on your host router.

  • Wait for 2-3 minutes.

  • Now, press the WPS button on DLink extender.

In accordance to the points listed above, we are sure that – your DLink extender and router are connected properly. If so, then it is anticipated that the device (extender) has started working for you now.